Subrack K-RACK.1.**...WW.01-Y*******

Subrack for K-System
Replacement for subrack of the E-System
Max. 33 slots for isolators
Long design (300 mm mounting depth)
Connection via marshalling patchboards
Partial and combined assembly possible
Complete wiring according to customer requirements
Allows to retain cable routing in the switch cabinet
No structural changes on the switch cabinet required

Technical Data
Documents
Approvals+Certificates
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

技術データ K-RACK.1.**...WW.01-Y*******

Slots
Supply		max. 2 , see section application
Isolators		max. 33 , see section application
Supply
Connection		isolator power supply via marshalling patchboards or Power Rail
Nominal voltage		24 V DC , in consideration of rated voltage of used isolators
Fusing		max. 4 A , in consideration of rated voltage of used isolators
Redundancy		redudnancy possible, depends on the used power feed module
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011
RoHS
	Directive 2011/65/EU (RoHS)	EN IEC 63000:2018
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Connection
	Field side	marshalling patchboards
	Control side	marshalling patchboards
	Supply	marshalling patchboards or Power Rail
Core cross section		field side: max. 2.5 mm² control side: max. 2.5 mm² internal signal wiring: 0.25 mm² supply: max. 1.5 mm²
Material
	Housing	galvanized steel
	Surface	galvanized , vibratory finishing
Mass		approx. 4 kg , without modules
Dimensions		485 mm x 132 mm x 339 mm (W x H x D)
	Height	132 mm
	Width	485 mm
	Depth	339 mm
Mounting		slotted hole 8 x 10 mm
Grounding		via front fastening M8 , via lateral fastening on both sides M5
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27219090
ECLASS 12.0	27219090
ECLASS 11.0	27219290
ECLASS 10.0.1	27219290
ECLASS 9.0	27219290
ECLASS 8.0	27219290
ECLASS 5.1	27279201
ETIM 9.0	EC003015
ETIM 8.0	EC003015
ETIM 7.0	EC003015
ETIM 6.0	EC003015
ETIM 5.0	EC003015
UNSPSC 12.1	32101514

Details: K-RACK.1.**...WW.01-Y*******

Datasheet: K-RACK.1.**...WW.01-Y*******

Datasheet	ファイルタイプ	ファイルサイズ
Datasheet K-RACK.1.*...WW.01-Y******	PDF	875 KB
Fiche de données K-RACK.1.*...WW.01-Y******	PDF	877 KB
Datenblatt K-RACK.1.*...WW.01-Y******	PDF	877 KB
Datasheet K-RACK.1.*...WW.01-Y******	PDF	881 KB
Hoja de datos K-RACK.1.*...WW.01-Y******	PDF	876 KB

Documents: K-RACK.1.**...WW.01-Y*******

Instruction manuals	ファイルタイプ	ファイルサイズ
Инструкции	PDF	139 KB
Návod k poużití	PDF	134 KB
Instruktions manual	PDF	134 KB
Instruction manual	PDF	139 KB
Kasutusjuhend	PDF	132 KB
Käyttöohje	PDF	129 KB
Manuel d'instructions	PDF	135 KB
Betriebsanleitung	PDF	140 KB
Οδηγίες χρήσης	PDF	141 KB
Handleiding	PDF	134 KB
Instruction manual / Betriebsanleitung	PDF	133 KB
Használati útmutató	PDF	134 KB
Manuale di istruzioni	PDF	134 KB
Lietošanas pamācība	PDF	134 KB
Instrukciju vadovas	PDF	136 KB
Instrukcja obsługi	PDF	136 KB
Manual de instruções	PDF	135 KB
Manual de utilizare	PDF	134 KB
Návod na poużitie	PDF	134 KB
Navodila za uporabo	PDF	131 KB
Manual de instrucciones	PDF	135 KB
Manual	PDF	131 KB

Approvals+Certificates: K-RACK.1.**...WW.01-Y*******

Declaration of Conformity	ファイルタイプ	ファイルサイズ
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	PDF	264 KB

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.