ファクトリーオートメーション(FA)
プロセスオートメーション(PA)
Not available for purchase
Not available for purchase

WCS interface module WCS-DDM1

WCS-DDM1
  • Connection of up to 4 read heads LS211 or LS111
  • Listener on RS485 bus
  • DIN rail mounting

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):


技術データ  WCS-DDM1

型番
Indication and diagnosis module
General specifications
InstallationDIN rail mounting
Electrical specifications
Operating voltage24 V ± 20 %
Power consumption≤ 2 W (without read heads)
Interface 1
Connection ofcontrol system
Interface typePush-pull, parallel
Output stagePush-pull (4 in 1) output
Load currentmax. 15 mA
Data output formatbinary code
Interface 2
Connection ofRead head
Connectable read headsWCS-LS221 , WCS-LS211
Interface typeRS-485
Transmission methodhalf duplex
Transfer ratemax. 62.5 kBit/s
RS485 termination resistorswitchable
Standard conformity
Emitted interferenceEN 55011
Noise immunityDIN EN 50082-2
Ambient conditions
Operating temperature0 ... 55 °C (32 ... 131 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Relative humidity≤ 80 %
Mechanical specifications
Connection typeremovable terminal block
Degree of protectionIP20
Materialplastic
Installation positionany position
Massapprox. 400 g
Dimensions
Height74 mm
Width100 mm
Depth121 mm

Classifications

SystemClasscode
ECLASS 13.027270991
ECLASS 12.027270991
ECLASS 11.027270791
ECLASS 10.0.127270791
ECLASS 9.027270791
ECLASS 8.027270791
ECLASS 5.127270791
ETIM 9.0EC001852
ETIM 8.0EC001852
ETIM 7.0EC001852
ETIM 6.0EC001852
ETIM 5.0EC001852
UNSPSC 12.141111945

Details: WCS-DDM1

Product Documentation: WCS-DDM1

Language Selection:
Manuals言語ファイルタイプファイルサイズ
ManualENGPDF12338 KB
Manual WCS ElectricalENGPDF4782 KB