Inductive sensor NMB10-18GM50-E2-F

10 mm flush
Active surface metal
One-piece housing with stainless steel (V4A; 1.4435)

Technical Data
Design / Simulation
Approvals
関連製品
FAQ/Knowledge Base
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ NMB10-18GM50-E2-F

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		10 mm
Installation		flush in mild steel
Output polarity		DC
Assured operating distance		0 ... 8.1 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.25
Reduction factor r₃₀₄		0.5 (0.9 of material thickness 2 mm)
Reduction factor r_St37		1
Output type		3-wire
Nominal ratings
Installation conditions
	A	0 mm
	B	16 mm
	C	30 mm
	F	60 mm
Operating voltage		10 ... 30 V
Switching frequency		0 ... 300 Hz
Hysteresis		3 ... 15 typ. 5 %
Reverse polarity protection		yes
Short-circuit protection		yes
Voltage drop		≤ 2 V
Operating current		0 ... 200 mA
Off-state current		≤ 0.1 mA
No-load supply current		≤ 10 mA
Time delay before availability		≤ 40 ms
Switching state indicator		LED, yellow
Limit data
Operating pressure statically		60 bar (870.2 psi) max.
Functional safety related parameters
MTTF_d		375 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		cable TPE-S , 2 m 3 x 0.34 mm²
Housing material		Stainless steel 1.4435 / AISI 316L
Sensing face		Stainless steel 1.4435 / AISI 316L
Degree of protection		IP68 / IP69K
Mass		112 g
Dimensions
	Length	70 mm
	Diameter	18 mm
General information
Assembly dimensions		x: 18 mm y: ≥ 4 mm

Classifications

System	Classcode
ECLASS 13.0	27274001
ECLASS 12.0	27274001
ECLASS 11.0	27270101
ECLASS 10.0.1	27270101
ECLASS 9.0	27270101
ECLASS 8.0	27270101
ECLASS 5.1	27270101
ETIM 9.0	EC002714
ETIM 8.0	EC002714
ETIM 7.0	EC002714
ETIM 6.0	EC002714
ETIM 5.0	EC002714
UNSPSC 12.1	39121550

Details: NMB10-18GM50-E2-F

Design / Simulation: NMB10-18GM50-E2-F

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	95 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	60 KB

Approvals: NMB10-18GM50-E2-F

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada USA UL Ordinary Location	E87056	ALL	PDF	451 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2827B	ALL	PDF	1220 KB
UK Declaration of Conformity (P+F)	TDOC-6052_ENG	ENG	PDF	1234 KB

関連製品: NMB10-18GM50-E2-F

Accessories

	BF 18 Mounting flange
	Mounting flange, 18 mmfa

General Notes Relating to Pepperl+Fuchs Product Information

The Original: The Evolution of an Everlasting Technology

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

SIL 2/PL d Inductive Safety Sensors

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.