Inductive power clamp sensor NBN3-FXA-3E2-2V1

Weld Immune
Completely halogen and silicon free

Technical Data
Product Documentation
Design / Simulation
Approvals
関連製品
FAQ/Knowledge Base
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ NBN3-FXA-3E2-2V1

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		3 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		1 ... 3 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.7
Output type		3-wire
Nominal ratings
Operating voltage		12 ... 30 V DC
Switching frequency		0 ... 100 Hz
Hysteresis		0.4 ... 0.6 mm
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 100 mA
No-load supply current		≤ 35 mA
Time delay before availability		≤ 300 ms
Operating voltage indicator		LED green
Switching state indicator		1 LED gelb je Schaltpunkt
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin ,
Housing material		PA 6
Degree of protection		IP65
Mass		160 g
Dimensions
	Height	25 mm
	Width	60 mm
	Length	118 mm

Classifications

System	Classcode
ECLASS 13.0	27210801
ECLASS 12.0	27210801
ECLASS 11.0	27210801
ECLASS 10.0.1	27210801
ECLASS 9.0	27210801
ECLASS 8.0	27210801
ECLASS 5.1	27210801
ETIM 9.0	EC002714
ETIM 8.0	EC002714
ETIM 7.0	EC002714
ETIM 6.0	EC002714
ETIM 5.0	EC002714
UNSPSC 12.1	39121550

Details: NBN3-FXA-3E2-2V1

Product Documentation: NBN3-FXA-3E2-2V1

Manuals	言語	ファイルタイプ	ファイルサイズ
Manual	ENG	PDF	718 KB

Design / Simulation: NBN3-FXA-3E2-2V1

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	161 KB

Approvals: NBN3-FXA-3E2-2V1

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada USA CSA Ordinary Location	1007121	ALL	PDF	99 KB
Canada USA UL Ordinary Location	UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3	ALL	PDF	1806 KB

関連製品: NBN3-FXA-3E2-2V1

Accessories

	V1-G-OR2M-POC Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, POC cable welding-bead resistant orange, suitable for robotic applications, torsion resistant, oil resistant, molecularly cross-linkedfa

General Notes Relating to Pepperl+Fuchs Product Information

The Original: The Evolution of an Everlasting Technology

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

SIL 2/PL d Inductive Safety Sensors

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.