NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。
データシート(PDF):
General specifications | ||
---|---|---|
Switching function | 2 x normally closed (NC) | |
Output type | NAMUR | |
Rated operating distance | ||
Installation | ||
Assured operating distance | ||
Actual operating distance | ||
Reduction factor rAl | ||
Reduction factor rCu | ||
Reduction factor r304 | ||
Nominal ratings | ||
Switching frequency | ||
Hysteresis | ||
Reverse polarity protection | ||
Short-circuit protection | ||
Switching state indicator | ||
Limit data | ||
Standard conformity | ||
Standards | ||
Ambient conditions | ||
Ambient temperature | ||
Storage temperature | ||
Mechanical specifications | ||
Core cross-section | ||
Housing material | ||
Degree of protection | ||
General information | ||
Use in the hazardous area | ||
Category |
System | Classcode |
---|---|
ECLASS 13.0 | 27273901 |
ECLASS 12.0 | 27273901 |
ECLASS 11.0 | 27220501 |
ECLASS 10.0.1 | 27220501 |
ECLASS 9.0 | 27220501 |
ECLASS 8.0 | 27220501 |
ECLASS 5.1 | 27220501 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
CAD | 言語 | ファイルタイプ | ファイルサイズ |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 319 KB |
Certificates | 認証番号 | 言語 | ファイルタイプ | ファイルサイズ |
---|---|---|---|---|
EU TUV Nord ATEX ia 2G, 1G, 1D s. certificate | TÜV 99 ATEX 1479 X | ALL | 5439 KB |